aisi 3310 carburizing bearing steel

13FTM25 - members.agma

These include high carbon through-hardening grades such as AISI 52100 and A2 tool steel, as well as low carbon carburizing grades such as AISI 3310, 8620, and 9310. The relevant aspects of this specialized quenching technique will be presented together with a case study of the effects of prior thermal history on the distortion that is generated

3310 (1.0 C) Carburized Steel - CCT or TTT Diagram

AISI/SAE designation:3310 (1.0 C) Carburized Chemical composition in weight %:1.00% C, 0.45% Mn, 0.017% P, 0.009% S, 0.18% Si, 3.33% Ni, 1.52% Cr, 0.03% Mo Steel group:Alloy steels Note:Austenitizing temperature:1700 F, grain size:4-5. Reference:Not shown in this demo version. Transformation Diagram Price:30.00 US $ Buy Online 9310 / E9310 Chromium-Nickel-Molybdenum Aircraft

  • DescriptionApplicationsSpecificationsAvailable FormsThe high alloy content in 9310 allows for heavy sections to be treated to result in high case hardness and high core strength and toughness. This material is useful without carburizing, yet carburizing produces a highly wear-resistant case. The material is vacuum degassed and is also available in consumable electrode vacuum remelting process.Influence of Steel Type on the Propensity for Jan 23, 2010 · The disks were either through-hardened AISI 52100 or case carburized AISI 3310 steel with an outer diameter of 101.6 mm. The nominal composition of AISI 52100 steel is 1.04 wt% C, 0.35 wt% Mn, 0.25 wt% Si, and 1.45 wt% Cr with the balance Fe.

    AISI-3310 - Ju Feng Special Steel Co., Ltd.

    Along with steel bars, steel plates and steel tubes supply, steel cutting, drilling, machining and heat treatment services are also provided. JFS Steel has been offering customers special steel materials such as AISI-3310 Structural Steels with Specified Hardenability Bands and precision steel ASTM 52100 Bearing Steel 100Cr6 SUJ2 EN31 - Otai ASTM 52100 bearing steel, 100Cr6/1.3505, SUJ2, 535A99/EN31 chromium bearing steel detailed chemical composition, mechanical properties and heat treatment.

    DIN 14NiCr4/1.5752 BS EN36/655M13 AISI 3310/3415 Alloy

    DIN 14NiCr4/1.5752 AISI 3310/3415 BS EN36/655M13 Engineering Steel. Port:Hu nan. engineering steel, cold work tool steel, hot work tool steel, plastic mold steel, spring steel, high speed steel, stainless steel Development Installation and Testing of Case Hardening content of carbon in mild steel is less than 0.3% and in certain applications it requires sufficient hardness on surface of a component. Because of the lack of carbon, the metals are subjected to the carburizing Process. The carburizing process diffuses carbon in to the surface of heat treated components in an atmosphere controlled furnace.


    An extended life roller bearing having an outer race and rollers made of through-hardening steel such as AISI 52100, and an inner race of a carburizing grade of steel that is vacuum remelted, carburized, heated into the austenitizing range and quenched to convert austenite into martensite. The inner race is then subjected to a deep freeze Effect of nickel on the kinematic stability of retained Aug 01, 2020 · Evolution of BCC and FCC lattice strain for carburized AISI 8620, 4320 and 3310 grade bearing steel. Based on variation in the macro-stress on the specific grain orientation, the phase specific micro-mechanical behavior can be realized in three distinct stages as discussed below. 3.2.1. Stage I elastic response of martensite and RA

    Encore Metals - 3312

    3312. High alloy carburizing grade for those heavy-duty applications requiring high core strength, toughness and fatigue resistance over and above the widely used AISI 8620. Core strengths in the order of 170,000 psi (1172 N/mm2) are attainable. It is the preferred grade for carburized parts in severe operating conditions with excellent low Influence of Steel Type on the Propensity for In this study, two steel types, case carburized AISI 3310 and through-hardened AISI 52100, were wear tested using a ball-on-disk rolling/sliding contact tribometer in fully formulated commercial wind turbine gearbox oil under boundary lubrication conditions with 10% slip.

    MatWeb - The Online Materials Information Resource

    AISI 3310 Carburizing Bearing Steel:2:TBS-9 High Carbon Bearing Steel (Composition Spec) 3:SUJ 1 High Carbon Bearing Steel (Composition Spec) 4:105Cr6 High Carbon Bearing Steel (Composition Spec) 5:SHKH15-SHD High Carbon Bearing Steel (Composition Spec) 6:BG42 High Performance Bearing Steel:7:SCM420 Carburizing Bearing Steel Mohan Paladugu - Specialist - Materials Science - The Case carburized AISI 3310 steel showed significantly longer fatigue life than martensitically through-hardened 52100 steel. In addition, this study examined carburized steel that had been heat

    Press Quenching and Effects of Prior Thermal History on

    are routinely press-quenched. Common steel alloys that are press-quenched include high-carbon, through-hardening grades such as AISI 52100 and A2 tool steel. Press quenching is partic-ularly well-suited for the process of carburizing steel grades such as AISI 9310, 8620 and 3310. Ideally, the transformation temperature should be the same RENOLD AJAX MILL SPINDLE CATALOG (APRIL 2008)Split Oil Transfer Bearing Stationary Housing Rotational Restraint for Non-Rotational Components AISI Steel AISI 1045 AISI 4140 AISI 4140 AISI 8620 AISI 4320/4327 Nitralloy 135/135M AISI 4150 AISI 9310/3310 Nitralloy N Hardness Tempering Temp (Fº) Service

    Study Explores How To Resist Axial Cracks In Wind Turbines

    May 07, 2019 · Ten rollers consisting of through-hardened AISI 52100 steel and 10 consisting of carburized AISI 3310 steel were fabricated for the study. A Case for Carburized Bearings US4037300A - Drilling bit bearing structure - Google PatentsA rock drilling bit has a plurality of rolling cutters for pulverizing rock. The loads on the bearings between these cutters and their mounting pins are extreme and are carried by a friction bearing. The bearing surface in the cutter has a plurality of spaced apart pockets filled with a material harder than the carburized hardened steel of the balance of the bearing surface and having

    e Thrust ball bearing requires continuous pressure applied

    The balls and races are through-hardened to obtain a minimum hardness of 58 Rockwell C. (b) The cages are made from stampings of low carbon steel. (c) The rollers are made of case hardened steels (AISI 3310, 4620 or 8620). They are case carburized to obtain a surface hardness of 58 Rockwell C. round bar aisi 8620, round bar aisi 8620 Suppliers and offers 2,059 round bar aisi 8620 products. A wide variety of round bar aisi 8620 options are available to you, such as standard, processing service, and grade.

    Alloy Steel 3310 - aisi 3310

    Mar 17, 2015 · General characteristics of Alloy Steel 3310 Alloy steel 3310 is a case-hardening nickel-chromium steel with excellent toughness and strength properties.

Drop us a Line

Contact Address

Mountain Drive, Kensington,
Newyork, USA.
12 345 890123
Mon-Fri, 9am until 6pm
[email protected]
We reply within 24 hours